AIRBRUSH TECHNIQUE - LEARN TO AIRBRUSH - View Single Post

HoosierGunCoat · 03-12-2008

Hello all, new to airbrushing and the forum. I'm having a problem with my Badger 155. First let me explain a few details. I'm using Auto Air reduced just a bit, and just under 40 PSI. The tip and needle have both been replaced. The brush is not performing well at all. Paint will not flow when the trigger slightly pulled (no fine lines). If I pull back a little further the paint comes out rapidly. The brush ran fine a few days ago, now all the sudden it's giving me fits. I have cleaned it many times and it still won't operate.

Any ideas??

03-12-2008	#1 (permalink)
HoosierGunCoat MEMBER Join Date: Mar 2008 Posts: 1	Badger 155 Problems Hello all, new to airbrushing and the forum. I'm having a problem with my Badger 155. First let me explain a few details. I'm using Auto Air reduced just a bit, and just under 40 PSI. The tip and needle have both been replaced. The brush is not performing well at all. Paint will not flow when the trigger slightly pulled (no fine lines). If I pull back a little further the paint comes out rapidly. The brush ran fine a few days ago, now all the sudden it's giving me fits. I have cleaned it many times and it still won't operate. Any ideas??