Hi
What it would be harder to do with red that with another colour.?
I've just done a bike with few designs with Black base and silver Hok marblizer.
I get a problem because i've sprayed the sg100 to generously and the marblizer have fade in the SG100 (result , no more marble pattern)!
I've done it again with black base , silver marblizer, and have sprayed 2 very thin coats of SG100! No more problem !
Here a test panel done with black base, neutral marblizer mixed with blue pearls, 2 very thin coats of SG100 , and 2 heavy coats of 2 part clear mix with blue candy !
I think the problem is the SG100, you have to spray it with very thin coats , wait it completly dry , spray another coat !
I have also notice the marblizer pattern can be swip off with a very soft degreaser , the same degreaser i use to clean all my works and didn't get any problem with it ! Marblizer seems to be very sensible to the products you spray over it !
With thin coats , it works well ( use a fast thinner )
Pat